Open Access

Preparation And Characterization Of Metallated Carbon Black From Turmeric Spent

Volume 3, Issue 11

  • Author(s)Saigeetha V S, Rajesh C , George Mathew
  • AffiliationResearch scholar, St. Mary’s College, PG and Research Department of Chemistry, University of Calicut, Sulthan Bathery, Kerala, India. Associate Professor, 2MES Keveeyam College, University of Calicut, Valanchery, India. Assistant Professor, St. Mary’s College, PG and Research Department of Chemistry, University of Calicut, Sulthan Bathery, Kerala, India. Emai: 1saimalu999@gmail.com,2 rajeshchem77@gmail.com,3gmathew7@gmail.com
  • Page No.227-247
  • Volume, Issue & YearVolume 3 Issue 11,Nov-2026
  • Published On17/11/2026
  • JournalInternational Journal of Advanced Multidisciplinary Application (IJAMA)
  • ISSN No.3048-9350

Abstract

Turmeric spent refers to the residual material left after extracting curcumin and other bioactive compounds from turmeric rhizomes, which is utilized as a precursor for preparing carbon black and metalated carbon black. Carbon black received from turmeric spent is modified with Zn, Ni, Pb and Fe ions to investigate the influence of metal incorporation on its physicochemical properties. Atomic absorption spectroscopy (AAS) confirmed the presence of the respective metals in carbon black derived from spent turmeric. Elemental composition of each sample is analysed using CHNS analysis. Scanning electron microscope with energy dispersive X-ray spectroscopy (SEM-EDS) was used to confirm the presence of corresponding metals in carbon black. Nickel presence was confirmed using AAS even though it was masked in SEM EDS. Particle size distribution was analysed using Dynamic light scattering (DLS) and showed that L1 exhibited the smallest diameter of 35.9nm compared to other samples. The metalated samples exhibited less negative zeta potentials than CS (−11.9 mV), indicating surface-charge neutralization and reduced colloidal stability following metal adsorption. X-ray diffraction analysis (XRD) confirmed the formation of characteristic crystalline phases associated with Fe₃O₄, Fe₂O₃, PbO/lead-containing phases, ZnO/Zn, and Ni/NiO, depending on the metal treatment. The overall study showed that turmeric spent can serve as a low-cost potential biomass precursor for the preparation of metalated carbon black with tunable structural, surface and electrical properties, offering potential for applications in adsorption, catalysis, electrochemical systems and other value-added technologies.

Keywords: Metalated carbon black. Lead loaded carbon black. zinc loaded carbon black. Iron loaded carbon black, Nickel loaded carbon black

References

  1. kamine, Y., Nishino, F., Yamashita, T., Tsushida, M., & Awaya, K. (2024). The Impact of Metal − Support Interaction on the Structure and Activity of Carbon-Supported Ni Nanoparticle Catalysts for Alkaline Hydrogen Oxidation Reaction. https://doi.org/10.1021/acsami.4c15120
  2. 2. Anbari, M. J., Tabesh, M., & Roozbahani, A. (2017). Risk assessment model to prioritize sewer pipes inspection in wastewater collection networks. Journal of Environmental Management, 190, 91–101. https://doi.org/10.1016/j.jenvman.2016.12.052
  3. 3. Arora, R. (2019). Adsorption of heavy metals-a review. Materials Today: Proceedings, 18, 4745–4750. https://doi.org/10.1016/j.matpr.2019.07.462
  4. 4. Bashir, A., Malik, L. A., Ahad, S., Manzoor, T., Bhat, M. A., Dar, G. N., & Pandith, A. H. (2019). Removal of heavy metal ions from aqueous system by ion-exchange and biosorption methods. Environmental Chemistry Letters, 17(2), 729–754. https://doi.org/10.1007/s10311-018-00828-y
  5. 5. Bhaduri, G. A., Alamiry, M. A. H., & Šiller, L. (2015). Nickel Nanoparticles for Enhancing Carbon Capture. Journal of Nanomaterials, 2015. https://doi.org/10.1155/2015/581785
  6. 6. Boonamnuayvitaya, V., Chaiya, C., & Tanthapanichakoon, W. (2004). Removal of heavy metals by adsorbent prepared from pyrolyzed coffee residues and clay. 35, 11–22. https://doi.org/10.1016/S1383-5866(03)00110-2
  7. 7. Bužarovska, A., Dimitrovski, D., & Trajkovska Petkoska, A. (2025). Development of Poly(L-lactic acid) Films Containing Curcuma lunga L. Extract for Active Cheese Packaging. Processes, 13(6), 1–18. https://doi.org/10.3390/pr13061881
  8. 8. Cakrawati, D., Sugiarti, Y., & Handayani, S. (2024). Effect of ragi tape fermentation on physicochemical properties, phenolic compounds, and antioxidant capacity of turmeric spent. Maret, 18(1), 182–188. https://doi.org/10.21107/agrointek.v18i1.17604
  9. 9. Chakraborty, R., Asthana, A., Singh, A. K., Jain, B., & Susan, A. B. H. (2022). Adsorption of heavy metal ions by various low-cost adsorbents: a review. International Journal of Environmental Analytical Chemistry, 102(2), 342–379. https://doi.org/10.1080/03067319.2020.1722811
  10. 10. Chen, Y., Chen, H., Lo, M., & Chen, Y. (2021). Modification of Carbon Black with Hydrogen Peroxide for High Performance Anode Catalyst of Direct Methanol Fuel Cells. 1–13.
  11. 11. Chen, Y., Jiang, L., Lin, S., Dong, P., Fu, X., Wang, Y., Liu, Q., & Wu, M. (2024). Carbon-Supported Fe-Based Catalyst for Thermal-Catalytic CO2 Hydrogenation into C2+ Alcohols: The Effect of Carbon Support Porosity on Catalytic Performance. Molecules, 29(19). https://doi.org/10.3390/molecules29194628
  12. 12. Choi, S. S., Nah, C., & Jo, B. W. (2003). Properties of natural rubber composites reinforced with silica or carbon black: Influence of cure accelerator content and filler dispersion. Polymer International, 52(8), 1382–1389. https://doi.org/10.1002/pi.1232
  13. 13. Das, K. K., Das, S. N., & Dhundasi, S. A. (2008). Nickel, its adverse health effects & oxidative stress. Indian Journal of Medical Research, 128(4), 412–425.
  14. 14. Dasharathy, S., Arjunan, S., Maliyur Basavaraju, A., Murugasen, V., Ramachandran, S., Keshav, R., & Murugan, R. (2022). Mutagenic, Carcinogenic, and Teratogenic Effect of Heavy Metals. Evidence-Based Complementary and Alternative Medicine, 2022. https://doi.org/10.1155/2022/8011953
  15. 15. Feng, J., & Chan, C. M. (1998). Carbon black-filled immiscible blends of poly(vinylidene fluoride) and high density polyethylene: Electrical properties and morphology. Polymer Engineering and Science, 38(10), 1649–1657. https://doi.org/10.1002/pen.10335
  16. 16. Feng, J., Chan, C. M., & Li, J. X. (2003). A Method to Control the Dispersion of Carbon Black in an Immiscible Polymer Blend. Polymer Engineering and Science, 43(5), 1058–1063. https://doi.org/10.1002/pen.10089
  17. 17. García, A. B., Cuesta, A., Montes-Morán, M. A., Martínez-Alonso, A., & Tascón, J. M. D. (1997). Zeta potential as a tool to characterize plasma oxidation of carbon fibers. Journal of Colloid and Interface Science, 192(2), 363–367. https://doi.org/10.1006/jcis.1997.5007
  18. 18. Goel, A., Kunnumakkara, A. B., & Aggarwal, B. B. (2008). Curcumin as “Curecumin”: From kitchen to clinic. Biochemical Pharmacology, 75(4), 787–809. https://doi.org/10.1016/j.bcp.2007.08.016
  19. 19. Hamdy, A., Mostafa, M. K., & Nasr, M. (2019). Techno-economic estimation of electroplating wastewater treatment using zero-valent iron nanoparticles: batch optimization, continuous feed, and scaling up studies. Environmental Science and Pollution Research, 26(24), 25372–25385. https://doi.org/10.1007/s11356-019-05850-3
  20. 20. Hashim, K. S., Shaw, A., Al Khaddar, R., Pedrola, M. O., & Phipps, D. (2017). Iron removal, energy consumption and operating cost of electrocoagulation of drinking water using a new flow column reactor. Journal of Environmental Management, 189, 98–108. https://doi.org/10.1016/j.jenvman.2016.12.035
  21. 21. Hoseinian, F. S., Rezai, B., Kowsari, E., & Safari, M. (2019). A hybrid neural network/genetic algorithm to predict Zn(II) removal by ion flotation. Separation Science and Technology (Philadelphia), 55(6), 1197–1206. https://doi.org/10.1080/01496395.2019.1582543
  22. 22. Hu, C., Li, J., Li, Q., Lan, T., Zhang, J., Zhou, S., Rao, Y., & Cao, J. (2021). Rapid preparation of nano lead sulfate-lead carbon black composite by microwave method as a negative electrode additive for lead-carbon batteries. Electrochimica Acta, 384, 138411. https://doi.org/10.1016/j.electacta.2021.138411
  23. 23. Ince, M., & Kaplan İnce, O. (2017). An Overview of Adsorption Technique for Heavy Metal Removal from Water/Wastewater: A Critical Review. International Journal of Pure and Applied Sciences, 3(2), 10–19. https://doi.org/10.29132/ijpas.358199
  24. 24. International Carbon Black Association. (2016). Carbon Black User ’ s Guide. Carbon Black User’s Guide, 36. http://www.carbon-black.org/images/docs/2016-ICBA-Carbon-Black-User-Guide.pdf
  25. 25. International Carbon Black Association. (2024). Carbon Black User’s Guide: Safety, Health, & Environmental Information. September, 36.
  26. 26. Joshi, P., Joshi, S., Semwal, D. K., Bisht, A., Sharma, S., & Dwivedi, J. (2021). Chemical composition, antioxidative and antimicrobial activities of turmeric spent oleoresin. Industrial Crops and Products, 162(September 2020), 113278. https://doi.org/10.1016/j.indcrop.2021.113278
  27. 27. Kanagaraj, B., Anand, N., Raj R, S., & Lubloy, E. (2024). Utilizing agricultural turmeric bulbs as an alternative to traditional coarse aggregates in geopolymer concrete to explore its engineering properties. Developments in the Built Environment, 17(January), 100358. https://doi.org/10.1016/j.dibe.2024.100358
  28. 28. Karim, A., Raji, Z., Karam, A., & Khalloufi, S. (2023). Valorization of Fibrous Plant-Based Food Waste as Biosorbents for Remediation of Heavy Metals from Wastewater—A Review. Molecules, 28(10), 1–21. https://doi.org/10.3390/molecules28104205
  29. 29. Kerur, S. S., Bandekar, S., Hanagadakar, M. S., Nandi, S. S., Ratnamala, G. M., & Hegde, P. G. (2020). Removal of hexavalent Chromium-Industry treated water and Wastewater: A review. Materials Today: Proceedings, 42, 1112–1121. https://doi.org/10.1016/j.matpr.2020.12.492
  30. 30. Khatri, N., Tyagi, S., & Rawtani, D. (2017). Recent strategies for the removal of iron from water : A review. Journal of Water Process Engineering, 19(13), 291–304. https://doi.org/10.1016/j.jwpe.2017.08.015
  31. 31. Khdary, N. H., Alayyar, A. S., Alsarhan, L. M., Alshihri, S., & Mokhtar, M. (2022). Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion, Review. Catalysts, 12(3). https://doi.org/10.3390/catal12030300
  32. 32. Khodabakhshi, S., Fulvio, P. F., & Andreoli, E. (2020). Carbon black reborn: Structure and chemistry for renewable energy harnessing. Carbon, 162, 604–649. https://doi.org/10.1016/j.carbon.2020.02.058
  33. 33. Klaudia Jomova , Suliman Y Alomar , Eugenie Nepovimova , Kamil Kuca, M. V. (2025). Heavy metals: toxicity and human health effects. Arch Toxicol, 99(9), 153–209. https://doi.org/10.1007/s00204-024-03903-2.
  34. 34. Kyotani, M., Hiratani, K., Okada, T., & Matsushita, S. (2017). Preparation of 2D Carbon Materials by Chemical Carbonization of Cellulosic Materials to Avoid Thermal Decomposition. 1700061. https://doi.org/10.1002/gch2.201700061
  35. 35. Landim Neves, M. I., Strieder, M. M., Vardanega, R., Silva, E. K., & Meireles, M. A. A. (2020). Biorefinery of turmeric (: Curcuma longa L.) using non-thermal and clean emerging technologies: An update on the curcumin recovery step. RSC Advances, 10(1), 112–121. https://doi.org/10.1039/c9ra08265d
  36. 36. Lu, H., & Yu, S. (2018). Spatio-temporal variational characteristics analysis of heavy metals pollution in water of the typical northern rivers, China. Journal of Hydrology, 559, 787–793. https://doi.org/10.1016/j.jhydrol.2018.02.081
  37. 37. Luo, P., Mu, Y., Wang, S. et al. (2022). Exploring sustainable solutions for the water environment in Chinese and Southeast Asian cities. Ambio, 51, 1199–1218. https://doi.org/https://doi.org/10.1007/s13280-021-01654-3
  38. 38. Luo, P., Liu, L., Wang, S., Ren, B., He, B., & Nover, D. (2022). Influence assessment of new Inner Tube Porous Brick with absorbent concrete on urban floods control. Case Studies in Construction Materials, 17(June), e01236. https://doi.org/10.1016/j.cscm.2022.e01236
  39. 39. Matlock, M. M., Howerton, B. S., & Atwood, D. A. (2002). Chemical precipitation of heavy metals from acid mine drainage. Water Research, 36(19), 4757–4764. https://doi.org/10.1016/S0043-1354(02)00149-5
  40. 40. Meslam, M., Elzatahry, A. A., & Youssry, M. (2022). Promising aqueous dispersions of carbon black for semisolid flow battery application. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 648(May), 129376. https://doi.org/10.1016/j.colsurfa.2022.129376
  41. 41. Mu, D., Luo, P., Lyu, J., Zhou, M., Huo, A., Duan, W., Nover, D., He, B., & Zhao, X. (2021). Impact of temporal rainfall patterns on flash floods in Hue City, Vietnam. Journal of Flood Risk Management, 14(1), 1–15. https://doi.org/10.1111/jfr3.12668
  42. 42. Muralidharan, L., Gaur, S., & Chinmay, M. (2019). Analysis of Heavy and Trace Metals in Golden Ingredient Turmeric (Curcuma longa) of Mumbai, Maharashtra. International Journal of Bio-Science and Bio-Technology (IJBSBT), 11(8), 4–9. https://doi.org/10.13140/RG.2.2.25945.88168
  43. 43. Nagarajan, S., Kubra, I. R., & Rao, L. J. M. (2010). Separation of Curcuminoids Enriched Fraction from Spent Turmeric Oleoresin and Its Antioxidant Potential. Journal of Food Science, 75(6), 158–162. https://doi.org/10.1111/j.1750-3841.2010.01696.x
  44. 44. Nampoothiri, S. V., Lekshmi, P. C., Venugopalan, V. V., & Menon, A. N. (2012). Antidiabetic and antioxidant potentials of spent turmeric oleoresin, a by-product from curcumin production industry. Asian Pacific Journal of Tropical Disease, 2(SUPPL.1), S169–S172. https://doi.org/10.1016/S2222-1808(12)60146-7
  45. 45. Narayan Thorat, B., & Kumar Sonwani, R. (2022). Current technologies and future perspectives for the treatment of complex petroleum refinery wastewater: A review. Bioresource Technology, 355(February), 127263. https://doi.org/10.1016/j.biortech.2022.127263
  46. 46. Nie, R., Yang, H., Zhang, H., Yu, X., Lu, X., Zhou, D., & Xia, Q. (2017). Mild-temperature hydrodeoxygenation of vanillin over porous nitrogen-doped carbon black supported nickel nanoparticles. Green Chemistry, 19(13), 3126–3134. https://doi.org/10.1039/c7gc00531h
  47. 47. Nur-E-Alam, M., Mia, M. A. S., Ahmad, F., & Rahman, M. M. (2020). An overview of chromium removal techniques from tannery effluent. Applied Water Science, 10(9), 1–22. https://doi.org/10.1007/s13201-020-01286-0
  48. 48. Plum, L. M., Rink, L., & Hajo, H. (2010). The essential toxin: Impact of zinc on human health. International Journal of Environmental Research and Public Health, 7(4), 1342–1365. https://doi.org/10.3390/ijerph7041342
  49. 49. Qasem, N. A. A., Mohammed, R. H., & Lawal, D. U. (2021). Removal of heavy metal ions from wastewater: a comprehensive and critical review. Npj Clean Water, 4(1). https://doi.org/10.1038/s41545-021-00127-0
  50. 50. Raj, K., & Das, A. P. (2023). Lead pollution: Impact on environment and human health and approach for a sustainable solution. Environmental Chemistry and Ecotoxicology, 5(February), 79–85. https://doi.org/10.1016/j.enceco.2023.02.001
  51. 51. Rattanasom, N., Saowapark, T., & Deeprasertkul, C. (2007). Reinforcement of natural rubber with silica/carbon black hybrid filler. Polymer Testing, 26(3), 369–377. https://doi.org/10.1016/j.polymertesting.2006.12.003
  52. 52. Rosner, F., Bhagde, T., Slaughter, D. S., Zorba, V., & Stokes-Draut, J. (2024). Techno-economic and carbon dioxide emission assessment of carbon black production. Journal of Cleaner Production, 436(August 2023), 140224. https://doi.org/10.1016/j.jclepro.2023.140224
  53. 53. Saleem, H., Pal, P., Haija, M. A., & Banat, F. (2019). Regeneration and reuse of bio-surfactant to produce colloidal gas aphrons for heavy metal ions removal using single and multistage cascade flotation. Journal of Cleaner Production, 217(2019), 493–502. https://doi.org/10.1016/j.jclepro.2019.01.216
  54. 54. Schultheis, S. E., Herold, F., Koh, E. S., Oefner, N., Hungsberg, M., Drochner, A., & Etzold, B. J. M. (2023). Iron supported on beaded carbon black as active, selective and stable catalyst for direct CO2 to olefin conversion. Catalysis Communications, 175(February), 106622. https://doi.org/10.1016/j.catcom.2023.106622
  55. 55. Seo, S., Lages, B., & Kim, M. (2020). Catalytic CO2 absorption in an amine solvent using nickel nanoparticles for post-combustion carbon capture. Journal of CO2 Utilization, 36(October 2019), 244–252. https://doi.org/10.1016/j.jcou.2019.11.011
  56. 56. Shahabi Nejad, M., & Sheibani, H. (2022). Super-efficient removal of arsenic and mercury ions from wastewater by nanoporous biochar-supported poly 2-aminothiophenol. Journal of Environmental Chemical Engineering, 10(3), 107363. https://doi.org/10.1016/J.JECE.2022.107363
  57. 57. Shambu, B. S., Rajeshwari, K. M., Bindya, S., Hemavathi, A. B., Keerthi, M. L., Lakshmi, S., Singh, P., Shivamallu, C., Abass, K. S., Stupin, V., Silina, E., & Kollur, S. P. (2026). Turmeric essential oil infused pectin blended sodium alginate polymer as sustainable food packaging material. Scientific Reports, 16(1), 1–15. https://doi.org/10.1038/s41598-026-38254-8
  58. 58. Sharma, P., Iqbal, H. M. N., & Chandra, R. (2022). Evaluation of pollution parameters and toxic elements in wastewater of pulp and paper industries in India: A case study. Case Studies in Chemical and Environmental Engineering, 5(September 2021), 100163. https://doi.org/10.1016/j.cscee.2021.100163
  59. 59. Slaček, G., Kotnik, P., Osmić, A., Postružnik, V., Knez, Ž., Finšgar, M., & Knez Marevci, M. (2023). The Extraction Process, Separation, and Identification of Curcuminoids from Turmeric Curcuma longa. Foods, 12(21). https://doi.org/10.3390/foods12214000
  60. 60. Staszak, K., & Wieszczycka, K. (2023). Recovery of Metals from Wastewater—State-of-the-Art Solutions with the Support of Membrane Technology. Membranes, 13(1). https://doi.org/10.3390/membranes13010114
  61. 61. Sun, Y., Zhou, S., Pan, S. Y., Zhu, S., Yu, Y., & Zheng, H. (2020). Performance evaluation and optimization of flocculation process for removing heavy metal. Chemical Engineering Journal, 385(December 2019), 123911. https://doi.org/10.1016/j.cej.2019.123911
  62. 62. Syed, M. A., Siddaramaiah, Syed, R. T., & Syed, A. A. (2010). Investigation on physico-mechanical properties, water, thermal and chemical ageing of unsaturated polyester/turmeric spent composites. Polymer - Plastics Technology and Engineering, 49(6), 555–559. https://doi.org/10.1080/03602550903533974
  63. 63. Tamjidi, S., Esmaeili, H., & Kamyab Moghadas, B. (2019). Application of magnetic adsorbents for removal of heavy metals from wastewater: A review study. Materials Research Express, 6(10). https://doi.org/10.1088/2053-1591/ab3ffb
  64. 64. Tan Li, Wenbo Sun, Xianzhong Wang, Yan Li, Minggang Lin, Yangyi Chen, Chuyang Zhang, H. Q. (2025). Carbon black and polyetherimide modified ES nonwovens for low-cost and continuous seawater desalination. Separation and Purification Technology, 354(3), 128939. https://doi.org/https://doi.org/10.1016/j.seppur.2024.128939.
  65. 65. Tripathy, Banismita, Akankshya, A. P. (2024). Detection of Environmental Microfiber Pollutants through Vibrational Spectroscopic Techniques: Recent Advances of Environmental Monitoring and Future Prospects. Critical Reviews in Analytical Chemistry, 54(7), 1925–1935. https://doi.org/https://doi.org/10.1080/10408347.2022.2144994
  66. 66. Türkez, H., Arslan, M. E., Sönmez, E., Tatar, A., Geyikoğlu, F., Açikyildiz, M., & Mardinoğlu, A. (2021). Safety Assessments of Nickel Boride Nanoparticles on the Human Pulmonary Alveolar Cells by Using Cell Viability and Gene Expression Analyses. Biological Trace Element Research, 199(7), 2602–2611. https://doi.org/10.1007/s12011-020-02374-7
  67. 67. Vedashree M, Pradeep K, Ravi R, & Madhava Naidu M. (2016). Turmeric Spent Flour: Value Addition to Breakfast Food. 1(2), 1002–1006. www.austinpublishinggroup.com
  68. 68. Wang, F., Zheng, Z., Wu, D., Wan, H., Chen, G., Zhang, N., Liu, X., & Ma, R. (2024). Tunable Pt-NiO interaction-induced efficient electrocatalytic water oxidation and methanol oxidation. Chemical Science, 15(26), 10172–10181. https://doi.org/10.1039/d4sc00454j
  69. 69. Wang, Q., Yu, J., Chen, X. Y., Du, D., Wu, R., Qu, G., Guo, X., Jia, H., & Wang, T. (2019). Non-thermal plasma oxidation of Cu(II)-EDTA and simultaneous Cu(II) elimination by chemical precipitation. Journal of Environmental Management, 248(June), 109237. https://doi.org/10.1016/j.jenvman.2019.07.008
  70. 70. Wang, R., Shu, J., Chen, M., Wang, R., He, D., Wang, J., Tang, C., Han, Y., & Luo, Z. (2021). An innovative method for fractionally removing high concentrations of Ni2+, PO43−, TP, COD, and NH4+-N from printed-circuit-board nickel plating wastewater. Separation and Purification Technology, 260(August 2020), 118241. https://doi.org/10.1016/j.seppur.2020.118241
  71. 71. Wang, Z., Luo, P., Zha, X., Xu, C., Kang, S., Zhou, M., Nover, D., & Wang, Y. (2022). Overview assessment of risk evaluation and treatment technologies for heavy metal pollution of water and soil. Journal of Cleaner Production, 379, 134043. https://doi.org/10.1016/J.JCLEPRO.2022.134043
  72. 72. Wei, W., Ma, R., Sun, Z., Zhou, A., Bu, J., Long, X., & Liu, Y. (2018). Effects of mining activities on the release of heavy metals (HMs) in a typical mountain headwater region, the Qinghai-Tibet Plateau in China. International Journal of Environmental Research and Public Health, 15(9). https://doi.org/10.3390/ijerph15091987
  73. 73. World Health Organization. (2004). Guidelines for Drinking Water Quality:Recommendations (3rd ed.). World Health Organization.
  74. 74. Wu, T., Liu, C., Kong, B., Sun, J., Gong, Y., Liu, K., Xie, J., Pei, A., & Cui, Y. (2019). Amidoxime-Functionalized Macroporous Carbon Self-Refreshed Electrode Materials for Rapid and High-Capacity Removal of Heavy Metal from Water. ACS Central Science, 5(4), 719–726. https://doi.org/10.1021/acscentsci.9b00130
  75. 75. Xia, J., Fu, Y., He, G., Sun, X., & Wang, X. (2017). Core-shell-like Ni-Pd nanoparticles supported on carbon black as a magnetically separable catalyst for green Suzuki-Miyaura coupling reactions. Applied Catalysis B: Environmental, 200, 39–46. https://doi.org/10.1016/j.apcatb.2016.06.066
  76. 76. Xia, J., He, G., Zhang, L., Sun, X., & Wang, X. (2016). Hydrogenation of nitrophenols catalyzed by carbon black-supported nickel nanoparticles under mild conditions. Applied Catalysis B: Environmental, 180, 408–415. https://doi.org/10.1016/j.apcatb.2015.06.043
  77. 77. Yedurkar, S., Maurya, C., & Mahanwar, P. (2016). Biosynthesis of Zinc Oxide Nanoparticles Using Ixora Coccinea Leaf Extract—A Green Approach. Open Journal of Synthesis Theory and Applications, 05(01), 1–14. https://doi.org/10.4236/ojsta.2016.51001
  78. 78. Youssry, M. (2018). Aqueous dispersions of carbon black and its hybrid with carbon nano fibers. RSC Advances, 8, 32119–32131. https://doi.org/10.1039/c8ra05446k
  79. 79. Yukselen-aksoy, Y., & Kaya, A. (2016). The Zeta Potential of a Mixed Mineral Clay in the Presence of Cations. 1(1), 14–21.
  80. 80. Zha, X., Luo, P., Zhu, W., Wang, S., Lyu, J., Zhou, M., Huo, A., & Wang, Z. (2021). A bibliometric analysis of the research on Sponge City: Current situation and future development direction. Ecohydrology, 14(7), 1–16. https://doi.org/10.1002/eco.2328
  81. 81. Zhang, B. B., Chen, Y., Wang, F., & Hong, R. Y. (2015). Surface modification of carbon black for the reinforcement of polycarbonate/acrylonitrile-butadiene-styrene blends. Applied Surface Science, 351, 280–288. https://doi.org/10.1016/j.apsusc.2015.05.106
  82. 82. Zhang, J., Li, J., Li, H., Yang, M., Li, Y., Qi, Y., Xu, Y., Hu, W., & Liu, B. (2024). Recent Overview and Future Research Prospects of Cross-linked Polyethylene Materials: Cross-linking Methods and Applications. Preprints. https://doi.org/10.20944/preprints202409.1601.v1
  83. 83. Zhang, Q., Ye, X., Li, H., Chen, D., Xiao, W., Zhao, S., Xiong, R., & Li, J. (2020). Cumulative effects of pyrolysis temperature and process on properties, chemical speciation, and environmental risks of heavy metals in magnetic biochar derived from coagulation-flocculation sludge of swine wastewater. Journal of Environmental Chemical Engineering, 8(6), 104472. https://doi.org/10.1016/j.jece.2020.104472
  84. 84. Zhu, W., Wang, S., Luo, P., Zha, X., Cao, Z., Lyu, J., Zhou, M., He, B., & Nover, D. (2022). A Quantitative Analysis of the Influence of Temperature Change on the Extreme Precipitation. Atmosphere, 13(4), 1–15. https://doi.org/10.3390/atmos13040612

Explore Our Related Journals

Looking for the right journal for your next manuscript? Explore our international peer-reviewed journals covering engineering, management, computer science, artificial intelligence and multidisciplinary research.